Harbor Freight Tools 94830 - Manual (Page 6)

SKU 94830 For technical questions, please call 1-800-444-3353 PAGE 6
Attach The Ramp Extensions To The Motorcycle Ramp:
1. With assistance, insert the hook on the Left Ramp Extension (4) into the mount-
ing hole in the end of the Left Side Extension (2).
(See Figure A.)
2. Align the two mounting holes under the Left Ramp Extension (4) with the two
mounting holes in left side of the Ramp. Then secure the Left Ramp Extension to
the Ramp, using two Bolts (12), two Washers (13), and two Nuts (14).
(See Figure A.)
3. Align the two mounting holes in the Right Ramp Extension (3) with the two
mounting holes in the right side of the Ramp. Then secure the Right Ramp Ex-
tension to the Ramp, using two Bolts (12), two Washers (13), and two Nuts (14).
(See Figure A.)
Attach The Stabilizer Bar To The Motorcycle Lift Frame:
1. Insert the Stabilizer Bar (11) through the bottom/front frame of the Motorcycle
Lift. (See Figure B.)
2. Align the two innermost mounting holes under the Stabilizer Bar (11) with the two
mounting holes in the bottom/front frame of the Motorcycle Lift. Then secure the
Stabilizer Bar to the frame, using two Pins (10).
(See Figure B.)
3. Slide a Pipe Cap (9) onto each end of the Stabilizer Bar (11). Then secure the
Pipe Caps to the Stabilizer Bar, using one Pin (10) for each Pipe Cap.
(See Figure B.)
11
10
10
10
10
9
9
FIGURE B