beautypg.com

Safety precautions, Operation, Maintenance & storage – Hayter Mowers Envoy 36 100E User Manual

Page 6: Safety symbols cont’d, Control symbols

background image

7

6

SAFETY PRECAUTIONS

Operation

cont

Always be sure of your footing on slopes.

Walk, never run.

Do not mow excessively steep slopes of more than 20

O

and mow across the face of slopes, never up and down.

Exercise extreme caution when changing direction.

Use extreme caution when reversing or pulling the

mower towards you.

Switch off, if the mower has to be tilted for transporta-

tion when crossing surfaces other than grass and when

transporting the mower to and from the area to be

mowed.

Always replace worn or faulty parts with genuine Hayter

parts.

Never operate the machine with defective guards, or with

out safety devices, for example deflectors and/or grass

bag in place.

Do not put hands or feet near or under rotating parts.

Do not tilt the front of the mower more than is absolutely

necessary when starting.

Never lift the rear of the mower.

Never pick up or carry a mower whilst it is running or

connected to the mains supply.

Do not lift the rear deflector whilst the mower is in

operation, particularly when using without a grassbag.

Maintenance & Storage

Keep all nuts, bolts and screws tight to ensure that the

equipment is in safe operating condition.

Carefully examine the supply cable for signs of damage

or ageing. Replace immediately if defective.

Check the rear deflector and grassbag frequently for wear

or deterioration.

Replace worn or damaged parts for safety.

Wear strong work gloves when removing and reassem-

bling the cutterblade.

This machine contains spring loaded assemblies which

could cause a hazard when disassembled and re-assem-

bled, this maintenance should only be carried out by a

Hayter authorised dealer.

Safety Symbols cont’d

Do not use in rain or

in wet conditions

Control Symbols

Switch ON / OFF

Height of Cut Adjustment

Switch off and remove plug from mains be-

fore performing maintenance or repair work

Danger of electrical

shock, electrocution