beautypg.com

Harbor Freight Tools GORDON 66691 User Manual

Page 4

background image

SKU 66691

For technical questions, please call 1-800-444-3353.

Page 4

ger (8), then release the Trigger (8)

and the Spot Light will stay on.
When finished using the Spot Light,

3.

squeeze the Trigger to turn the Spot

Light off. Let the Bulb (14) cool for

at least 30 minutes before storing.

Keep Spotlight indoors away from

children.

replacing the 4V halogen bulb:

Remove the Ring Cover (12) from the

1.

Housing (2) by un-threading with a

counterclockwise motion.
Lift out Ring (11), Lens (10), and

2.

Reflective Bowl (9). The Bulb (14) is

installed into base of Reflective Bowl.
Remove the Metal Spring Clip (22)

3.

holding the Bulb Holder in place by

squeezing and lifting the Spring Clip

up through the “T” slot.
note: to prevent hand-oil contam-

4.

ination, do not touch the halogen

bulb (14) with bare hands. use a

lint free, soft, clean rag to handle

the bulb. Remove the Bulb from the

Bulb Holder by twisting it counter-

clockwise and lifting.
Replace with new, identical Bulb

5.

(25W Halogen H3 4V).
Place Bulb Holder into the Reflective

6.

Bowl (9). Slide the closed end of the

Metal Spring Clip (22) over the tab at-

tached to the side of the Bulb Holder,

and squeeze the Spring Clip together

while sliding it into the “T” slot.
Replace the Reflective Bowl (9), the

7.

Lens (10), and the Ring (11). Hold

these in place while threading the

Ring Cover (12) onto the Spot Light

with a clockwise motion.

removing and recycling the 4V dC

battery:
note: the battery for this product is

rechargeable and long lasting.

When finally it is worn beyond any

further use, it should be removed

and recycled and the spot light

should be disposed of with normal

refuse. DO NOT dispose of the

Spot Light with Battery inclosed in

it’s Housing.

Figure 2

seven screws

hold housing

together

1. To remove the Battery from the Hous-

ing (2), follow these steps:

Remove seven Screws from the

a.

Housing. See

Figure 2.

Pull the Housing (2) apart and re-

b.

move the wires connected to the

Battery.
Remove the Battery from the Hous-

c.

ing (2).

warning! do not dispose of the

4V lead acid battery with normal

refuse. always recycle in ac-

cordance with all local, state and

federal rules and regulations.