Guide of main menu – Humax VA-FOX User Manual
Page 23
Guide of Main Menu
You can set the Current Time and Wakeup Time in this mode.
Furthermore, the Service Number in the Wakeup Time mode and
Sleep Time(standby mode) can be set.
When a VCR is connected, recording can be automatically done
according to Wakeup/Sleep Time Setting.
To set the Current Time, enter the Offset value using the
standardised information of current service area.
The time setting will be used as the standardised time for the
I-Plate, TV Guide, Wakeup and Sleep Timer.
Current Time is based on TDT(Time and Data Table) at the stream
of the current service.
Select the time when STB is turned on.
Use the Numeric buttons(0~9) on the remote control unit to enter
your Wakeup Time.
Use the buttons to set the service number provided for the set
Wakeup Time.
Use the
TV/Radio
( )button on the remote control unit to toggle
TV/Radio service.
The Service Name that has been determined by the Wakeup
Service No. will be shown.
Depending on Time Setting, select the time when STB is turned off.
Time Setting
Current Time
Time Offset
Wakeup Time
Wakeup Service No.
Service Name
Sleep Time
GB21
English (HSMM30GB) 10/30/02 10:06 AM Page 24