Hornet Car Security 563T - Manual (Page 34)

31 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a one hour period while the
system is in Valet Mode, the LED will shut off. If the system
remains in Valet Mode, the LED will come back on the next
time the ignition is turned on and then back off.
p prro og grra am mm miin ng g o op pttiio on nss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
➤ A Accttiivvee arming (transmitter only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
➤ Arming/disarming siren chirps oon n or off.
➤ The ignition controlled door lock feature oon n or off: When
this feature is programmed on, the doors will lock three
seconds after the ignition is turned on, and unlock when the
ignition is turned off. If your installer is programming the
security system with the Directed Bitwriter ® , ignition lock
and unlock are independent features that can be
programmed separately.
➤ Passive door locking (with passive arming) or aaccttiivvee d doooorr
lloocckkiin ngg (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security