Hobart Welding Products Plasma Cutter - Manual

MILD STEEL CUTTING CAPABILITY (Thickness to scale.)
AirForce ™ 625
Portable Air Plasma Cutter 211555
Jan. 2004
Comes Complete with
ICE-40C hand-held torch with 25 ft (7.6 m) or
50 ft (15.2 m) cable
Heavy-duty work clamp with 25 ft (7.6 m) or
50 ft (15.2 m) cable
Extra consumables (3 electrodes, 3 tips and
1 air fitting)
12 ft (3.7 m) industrial power cord and plug
Applications
Maintenance Prototyping
Light construction Body shops and fabrication
PROCESS
Air Plasma Cutting
and Gouging
Rated Output
40 A at 140 VDC,
50% Duty Cycle
Max. Open-
Circuit Voltage
260 VDC
Amps Input at Rated Output, 50/60 Hz, Single-Phase
208 V
230 V KVA KW
33 30 6.9 6.7
Dimensions
H: 15 1 ⁄ 4 in (387 mm)
W: 10 3 ⁄ 8 in (264 mm)
D: 17 1 ⁄ 4 in (438 mm)
Plasma Gas
Flow/Pressure
6 CFM (170 L/min) at
75 PSI (517 kPa)
Net Weight
with torch
60 lb
(27 kg)
Ship
Weight
67.5 lb
(30.6 kg)
SPECIFICATIONS
(SUBJECT TO CHANGE WITHOUT NOTICE.)
FEATURES BENEFITS
Prevents abrasive dust and particles from damaging internal components.
Cooling system only operates when needed. In dirty or dusty environments, this feature reduces the
amount of airborne dust/dirt pulled through the unit.
Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands
operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
Provides added protection during transportation. Standard air connection on back provides easy gas or air hookup.
Provides peak performance power under variable input voltage conditions (176–264 V) for steady and
cleaner ending cuts.
Will not interfere with or damage controls or computers.
Capable of cutting 3/8 to 5/8 in mild steel when powered by an engine-driven welder with a 240 V generator
power outlet of 8 kW or more.
No other manufacturer offers a better warranty than Hobart does. Power source is warranted for 3 years, parts and
labor. Original rectifier parts have a 5-year warranty and the ICE torches have a 1-year parts and labor warranty.
Wind Tunnel Technology ™
Fan-On-Demand ™
Power Factor Correction
(PFC) circuitry
Enclosed gas/air filter/regulator
LVC ™ line voltage compensation
Starts without high-frequency
Compatible with engine-driven
welders
Hobart’s 5/3/1 Warranty
1/2 in (13 mm) 5/8 in (16 mm) 7/8 in (22 mm)
Quality Rated
Cutting Capacity
10 inches per minute (min. speed at which an operator
achieves a smooth, steady cut using a hand-held torch). Maximum Quality Cutting Capacity
Good-quality cut achieved at lower speeds. Sever Cut Capacity
Maximum cut achieved in ideal conditions.
Sever
Hobart Welders
An Illinois Tool Works Company
U.S. Distributor Sales Phone 920-735-4576 FAX 800-637-2315
Hobart Retail Sales Phone 800-332-3281 FAX 937-332-4161
Canadian Sales Phone 888-489-9353 FAX 519-421-0480
International Sales Phone 920-735-4509 FAX 920-735-4125
Web Site www.HobartWelders.com