Hunter 22720 54 Cortland - Manual (Page 10)

10
41968-01 • 10/02/08 • Hunter Fan Company
7-1. Connect the upper plug connector from the motor to the lower
plug connector in the switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-2. To attach the switch housing, thread the screws through the side
holes of the mounting plate and tighten them securely.
Note: If you are installing the light fixture, proceed to 8 • Installing the
Light Fixture. If you are not installing the light fixture, proceed with
steps 7-3 – 7-4 to complete the installation.
7-3. Thread the finial with rod (from the sack parts) through the switch
housing cap and into the switch housing.
7-4. Tighten the finial.
Steps 7-1 – 7-2
Side Holes
Switch
Housing
Switch
Housing
Cap
Finial
Steps 7-3 – 7-4
7 • Installing the Switch Housing