Hotpoint WF101 - Manual (Page 9)

1. Switch the machine on by
pressing the On/Off button.
2. Sort your laundry into groups
by washcare labels. Load the
machine.
Close the machine door by
pushing it until it clicks.
3. Add detergent and fabric
conditioner
to the dispenser
drawer.
! Refer to detergent
manufacturer’s dosage
instructions.
4. Turn the programme
selector
dial to the required
programme.
5. Select any optional wash
feature(s)
( see Option Modifiers)
you require by pressing the
appropriate button(s).
- Indicator lights will show what
you have chosen.
6. Reduce the programmes
wash temperature:
Turn the Variable Temperature
dial to the reduced temperature
you require.
! When the programme has
finished return the dial to its
maximum setting.
7. Reduce the programmes spin speed:
Turn the Variable Spin Speed dial
to the reduced Spin Speed you
require.
! When the programme has
finished return the dial to its
maximum setting.
8. Start the programme by pressing the
Start/Cancel button for at least 3 seconds.
The ‘Door Locked’ indicator will light up.
● To stop/change a programme once the machine
has started:
- Press the Start/Cancel button for 3 seconds.
- Select ‘Pump Out’
on the Programme selector
dial.
When the machine has finished emptying:
- Turn the Programme selector dial to the new
programme required (you may need to add detergent).
- Press the Start/Cancel button to start the new
programme.
9. During the programme,
the status indicator lights will
show you what stage in the
programme
the machine has
reached (wash, rinse, spin).
10. A short time after the
programme has finished the
‘
Door Locked ’ indicator will go
out and you can open the
machine door.
11. Switch the machine off by pressing the On/Off
button.
! Do not allow children to play with the machine or
tamper with the controls.
! Do not overload the machine. This may damage the
laundry and reduce the quality of the wash.
The maximum load is 6kg (Cotton).
! Do not try to open the dispenser drawer during any
programme.
! Do not try to open the machine door when the
‘Door Locked’ indicator is lit.
Starting a typical wash programme
9
Starting a Programme
Description
C
ont
ents
Programmes
and
Option
Modif
iers
C
ontrol
Panel
F
eatures
Installation
Det
ergents
and
L
aundry
C
are
and
Maint
enanc
e
Prec
autions
and
A
dvic
e
Something
Wrong?
-
Troubleshooting
Servic
e
GB