beautypg.com

HONDA Motorcycle User Manual

Page 104

background image

96

Installation Notes:
Reverse the removal procedure to install the
wheel.

If a torque wrench was not used for installation,
see your authorized Honda dealer as soon as
possible to verify proper assembly. Improper
assembly may lead to loss of braking capacity.

Position the wheel between the fork legs and

insert the front axle shaft from the left side,
through the left fork leg and wheel hub.

When installing the wheel, fit the left brake disc

carefully between the brake pads to avoid
damaging the pads.

Tighten the axle bolt to the specified torque.

Axle bolt torque: 59 Nm(5.9 kg-m, 43 Ib-ft)

Tighten all the axle pinch bolts to the specified

torque. Axle pinch bolts torque: 22 Nm(2.2 kg-
m, 16 Ib-ft)






Install the caliper fixing bolts, and tighten to a

torque of: 27 Nm(2.7 kg-m, 20 Ib-ft)

Check the clearance (6) between the brake disc