Hotpoint HTU30 - Manual (Page 7)

Installing your Cooker Hood
7
Fixing the Cooker Hood
After having adjusted the hood for the version
required, it may be installed.
- This appliance is designed for fitting in a
cabinet or some other support.
- The opening to be made on the bottom of
the wall hung cabinet must correspond
with the measurements shown in fig. 2.
To fix the hood proceed as follows:
1. Remove the grille using the release clips
(fig. 3).
2. Fit the hood into the opening.
3. Secure the unit to the cabinet by screwing
up the screws through the hole D (fig. 2).
4. Refit the grille.
Fig.3
Fig.2