65” disassembly/assembly instructions, 2 - re-assembly procedure – Hitachi 65F710S User Manual

Page 76

Text mode
Original mode

65” DISASSEMBLY/ASSEMBLY INSTRUCTIONS

2 - RE-ASSEMBLY PROCEDURE

STEP 7

To re-assemble the set, lift the top portion and align onto the
bottom cabinet. Gently lower the top portion until it sits flush
on the bottom.

STEP 8

Re-install the joint connector bolts (4 pcs.) that were removed
in step 4 of the disassembly.

STEP 9

Re-install the top (4) four screws into the lower rear cover, see (a).

(a)

STEP 10

Re-connect the sensor connector to the sensor board, see (a). Re-install the sensor box, see (b).

(a)

(b)

STEP 11

Re-install the 8 screws that hold the frame to the cabinet on the front side of the TV.

STEP 12

Re-install both of the front decoration panels, see (a) and (b) Re-install the speaker grille, aligning it with the bottom cabinet, see (c). This com-
pletes the Disassembly and Assembly instructions.

(a)

(b)

(c)