beautypg.com

Lights – HONDA 31SAA610 User Manual

Page 207

background image

Open the tailgate. Place a cloth on
the edge of the light assembly
cover. Remove the cover by
carefully prying in the notch on its
middle edge with a flat-tip
screwdriver.

Determine which of the four bulbs
is burned out: stop/taillight, back-
up light, turn signal light, or
taillight.

Remove the socket by turning it
one-quarter turn counterclockwise.

Remove the burned out bulb from
the socket by pulling it straight out
of its socket.

Install the new bulb in the socket.

Turn on the lights to make sure
the new bulb is working.

Reinstall the socket into the light
assembly by turning it clockwise
until it locks.

Reinstall the light assembly cover.

1.

2.

3.

4.

5.

6.

7.

8.

Replacing Rear Bulbs

Lights

Ma

int
e

na
nce

201

LIGHT ASSEMBLY COVER