Harman-Kardon AVR 240 - Manual (Page 8)

The Bridge
•
∞
¶ ⁄ fi ª
¡
£
‹
°
b d
g
j
i a
™
¢
§
‚ ¤ ›
‡
c e
f h
k
U
V
W
X
a
b
c
Z
Y
fl
·
¡ FM Antenna Jack
™ CD Audio Inputs
£ Tape Outputs
¢ Tape Inputs
∞ Remote IR Input
§ Remote IR Output
¶ Preamp Outputs
• Subwoofer Output
ª Front Speaker Outputs
‚ Surround Back Speaker Outputs
⁄ Surround Speaker Outputs
¤ Center Speaker Outputs
‹ Component Video Monitor Outputs
› Component Video 1 Inputs fi Component Video 2 Inputs
fl AC Power Cord
‡ Switched AC Accessory Outlet
° Unswitched AC Accessory Outlet
· Optical Digital Audio Output
a Coaxial Digital Audio Output
b Coaxial Digital Audio Inputs
c S-Video Monitor Output
d DVD S-Video Input
e
DMP Connector
f Video 1 S-Video Input
g Optical Digital Audio Inputs
h Video 1 S-Video Output
i Video 2 S-Video Input
j 6/8-Channel Direct Inputs
k Video 2 S-Video Output
U Video 3 S-Video Input
V Video Monitor Output
W DVD Audio/Video Inputs
X Video 1 Audio/Video Inputs
Y Video 1 Audio/Video Outputs
Z Video 2 Audio/Video Inputs
a Video 2 Audio/Video Outputs
b Video 3 Audio/Video Inputs
c AM Antenna Terminals
The Bridge TM
NOTE: To assist in making the correct connections
for multichannel input, output and speaker connec-
tions, all connection jacks and terminals are color-
coded in conformance with the CEA standards
as follows:
Front Left: White
Front Right: Red
Center: Green
Surround Left: Blue
Surround Right: Gray
Surround Back Left: Brown
Surround Back Right: Tan
Subwoofer: Purple
Coaxial Digital Audio: Orange
Composite Video: Yellow
Component Video “Y”: Green
Component Video “Pr”: Red
Component Video “Pb”: Blue
¡ FM Antenna Jack: Connect the supplied indoor
(or an optional external) FM antenna to this terminal.
™ CD Audio Inputs: Connect these jacks to the
analog audio outputs of a compact disc player or
CD changer.
£ Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.
¢ Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.
∞ Remote IR Input: If the AVR 240’s front-panel
IR sensor is blocked due to cabinet doors or other
obstructions, an external IR sensor may be used.
Connect the output of the sensor to this jack.
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product
at www.harmankardon.com.
8 REAR-PANEL CONNECTIONS
REAR-PANEL CONNECTIONS
AVR 240 OM 4/7/06 4:08 PM Page 8