Harbor Freight Tools 9018 - Manual (Page 4)

Page 4
SKU 09018
See the Parts List/Drawing on page 6.
Assembly
FIGURE 1
FIGURE 2
FIGURE 3
Brace (#10)
Screws (#6)
Table
Stand (#1)
Umbrella
Stand (#9)
Screws (#6)
Bracket (#11)
Table Screw (#5)
Table
Board
(#2)
Screws (#6)
1. Assembling the Table Stand (#1): Use two sets of Screws (#6) on each side of the
Brace (#10) to support the bottom of the Table Stand (#1). Align the Umbrella Stand (#9)
next to the Brace (#10). See FIGURE 1.
2. Attach the two Brackets (#11) to the
underside of the Table Board (#2) using
four sets of Table Screws (#5).
See FIGURE 2.
3. Attach the Table Stand (#1) to
the Brackets (#11) on the
Table Board (#2) using two sets
of Screws (#6).
See FIGURES 2 & 3.