Ibm 4683 ports 5b, 9b, and 17 interface, Ibm 4683 ports 5b, 9b, and 17 interface -7 – Honeywell 3800gPDF User Manual

Page 23

Text mode
Original mode

1 - 7

All communication parameters between the imager and terminal must match for
correct data transfer through the serial port using RS-232 protocol. Scanning
the RS-232 interface bar code, programs the imager for an RS-232 interface at
38,400 baud, parity–none, 8 data bits, 1 stop bit, and adds a suffix of a CR LF.

Refer to

page 2-8

for additional RS-232 configuration settings.

IBM 4683 Ports 5B, 9B, and 17 Interface

Scan one of the following “Plug and Play” codes to program the 3800GX5E for
IBM 4683 Port 5B, 9B, or 17.

Note: After scanning one of these codes, you must power cycle the cash

RS-232 Interface

IBM 4683 Port 5B Interface

IBM 4683 Port 9B HHBCR-1 Interface

IBM 4683 Port 17 Interface

IBM 4683 Port 9B HHBCR-2 Interface

This manual is related to the following products:

3800g 3800gHD