Hunter Fan 42177 - Manual (Page 16)

44047-01 • 04/13/2010
16
6
Features
Menu Options
Under your menu options you have the ability to reset your filter counter,
span settings, and temperature measurement. After making changes
to each menu option, the thermostat will show “Updated”, save your
changes, and move you back to the home screen.
To access these options:
1. Press the
button.
2. Once in the menu options list, use the or buttons to scroll through
the menu items. The button will take you into the selected menu
item. To escape menu options, select a menu item by pressing ,
then press again.
3. RESET FILTER: If the filter indicator is flashing on the home screen you
can reset it here. Use the or buttons to select “Filter” and press
. The screen will flash “Updated” and return to the home screen.
4. SPAN 1: The next menu option is to set your thermostats primary
span. Use the or buttons to adjust between 1, 2, or, 3 degrees.
Press , the screen will flash “Updated” and return to the home
screen. The span setting regulates when and how long your system
will run. The span has been set at the factory to 2 which will allow the
system to turn on1 O F (.05 O C) above or below the set temperature and
run for 1 O F (.05 O C) above or below the set temperature.