Harbor Freight Tools 94683 - Manual (Page 10)

SKU 94683 For technical questions, please call 1-800-444-3353 PAGE 10
Directions For Bug Disposal:
1. Fire hazard: Do not spray pesticides or other flammable agents into the Bug
Vacuum during use. Allow all pesticides, if used, to dry before using the
Vacuum.
FIGURE H
VACUUM (1)
EXTENSION TUBE (3) BUG CHAMBER (2)
WIDE BUG
CATCHER
(5)
TROUBLESHOOTING
Problem Possible Solution
Tool does not turn on. 1. Make sure the Power Switch is in its
“ON” position.
2. Make sure to plug the Charger into a
working, 120 volt, grounded, electrical
outlet.
3. Make sure to charge the Battery fully from
14 to 16 hours.
4. Have a qualified service technician
check out the tool.
Tool turns on, but has little or no suction. 1. Make sure to charge the Battery fully from
14 to 16 hours.
2. Make sure all connections are tight.
3. Make sure no openings in the tool are
clogged.
4. Make sure the Vacuum Filter and/or
Mesh Screen is clean.
5. Have a qualified service technician
check out the tool.
TIP THIS END
TO DISPOSE
OF INSECTS