Huffy PROTEA 4.24C - Manual (Page 9)

03/03 P/N 211988B
9
8
4
5
6
3.
9
11
1
12
11
10
10
4.
2
26
26
3
3
7
Install wheel axle (2) through wheel carriage (7) and install wheels (3) onto
wheel axle (2) with spacers (26) as shown. Insert pole assembly into tank
assembly as shown. Secure bottom pole (4) to tank and wheel bracket as
shown, a deep socket is recommended. IMPORTANT! DO NOT OVER
TIGHTEN.
Secure tank struts (11) to pole.
Rotate non-secured ends of tank
struts (11) outward to mounting
holes in tank as shown.
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY
DAMAGE.
WARNING!
TIGHTEN BOLT (9) IN
LOCK NUT (12) UNTIL
FLUSH (EVEN) WITH
LOCK NUT’S OUTER
EDGE.
WARNING!
THE SPACER (26) WILL
FIT LOOSELY UNTIL
SECURED INTO THE
CAVITY OF THE BASE.
IMPORTANT!: