Philips HR 1821 - Manual (Page 7)

L) Lid
M) Feed tube
N) Pusher
Preparing the appliance for use
1 Wash all detachable parts (see section 'Cleaning').
C
2 Wind the mains cord from the reel on the base of the
appliance.
C
3 Attach the pulp container to the motor unit.You will hear a
click when it locks in place.
C
4 Slide the spout into the pulp collector and push it until you
hear a click.
C
5 Place the pulp collector onto the motor unit.
C
6 Put the sieve in the pulp collector.
Always check the sieve before use. If you detect any cracks or damage
do not use the appliance and contact the nearest Philips service centre
or take the appliance to your dealer.
ENGLISH 7
2
1