haier DW12-PFE2-E - Manual (Page 16)

14
Washing dishes EN
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as
well as the amount and condition of food remains, with the details contained in the wash cycle table.The
corresponding programme sequence, duration and consumption details are shown in the right half of the
overview. For example:
Use the «normal» programme for dishes and utensils which have plenty of food remains stuck on
hard.
Switching the dishwasher ON
•
Turn on the tap.
•
Set ON-OFF button “ A” to ON. All the programme
indicators “ J1, J2, J3, J4, J5, J6” light .
•
Press programme button “ I1” , programme indica-
tor “ J1” blinks and the time-remaining indicator “F”
displays the time of the programme..
•
If the door is closed, after 5 seconds, the pro-
gramme indicator “ J1” bcomes to light and the
dishwasher beeps one time, then the programme
starts automatically.
Earn savings
If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates
at the next lowest temperature will usually be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary considerably
according to:
•
different amounts of dishes
•
temperature of mains water supply
•
pressure of mains water supply
•
ambient temperature
•
fluctuations in mains voltage
•
machine-related factors (e.g. temperature, water volume,...)
Energy and water consumption is reduced by up to 1/4 when dishes are washed in the upper basket only.
The water consumption values are related to water hardness level 1.