beautypg.com

Operating your air purifier, Cleaning and filter replacement – Hunter Fan HEPATECH 30059 User Manual

Page 5

background image

5

© 2007 Hunter Fan Company

41663-01 10/24/2007

operating your Air Purifier

Ionizer: Press this button to turn ‘on’ the ionizer. When the ionizer is ‘on’, the

green light near the button will be illuminated.
on/Speed control: Rotate the Speed Control knob to set the desired speed. A set-

ting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium

speed, and three (3) is high speed. The fan speed can be adjusted at any time.
filter change calendar: The filter counter is designed to optimize the perfor-

mance of the air purifer by reminding you when to

change the HEPAtech Filter and pre-filter.
hePAtech filter calendar: The HEPAtech Filter

indicator is located at the top of the calendar ring. To

set the HEPAtech Filter counter, rotate the calendar

ring to align the month that you installed the filter with

the top indicator. Since the filter is designed for 6

months use, the two indicators will serve as reminders

to change the filter every 6 months.
Pre-filter calendar: The inner knob of the filter

counter is the pre-filter counter. To use, align the

knob with the month that you installed the pre-filter.

The replace symbol on the inner knob points to the

month in which you should install a new pre-filter. The pre-filter is designed for

three months of usage.

cleaning And filter replacement

1. Clean the outside of the unit with a soft, damp cloth. The front grill can be

removed and cleaned in soapy water.

2. At least every 90 days, open the front grill, remove the carbon pre-filter, and

replace it. This is necessary to maintain proper odor-removing and overall

filtration performance. If necessary, it can be changed more often. Mark the

new filter installation sticker included with the new carbon pre-filter. Be sure

to remove any plastic wrapping that may be on the new filter before you place

it into the Air Purifier.

3. While replacing the pre-filter, you should view the condition of the HEPAtech

Filter. Compare the filter to the color coded chart that is on the inside of the

housing. If the filter matches the dark color on the chart, you should remove

the filter and replace it with a new filter. Be sure to remove any plastic wrap-

ping that may be on the new filter before you place it into the Air Purifier.

Figure 3 - Calendar Knob

This manual is related to the following products: