beautypg.com

Husky HD289000 User Manual

Page 6

background image

Operating Instructions

6

Notes

Nailer Repair

Nailer repairs must be performed by
qualified and experienced service
people ONLY.

Assembly Procedure For
Seals

When repairing a nailer, the internal
parts must be cleaned and lubricated.
Parker O-lube or equivalent must be
used on all o-rings. Each o-ring must be
coated with O-lube before assembling.
A small amount of oil must be used on
all moving surfaces and pivots. After
reassembling, a few drops of 30W non-
detergent oil, or equivalent, must be
added through the air line before
testing.

Technical Support

Please call our Nailer Hotline at 1-800-
543-6400 with any questions regarding
the operation or repair of this nailer or
for additional copies of this manual.

Fastener And Replacement
Parts

See
Fastener

Interchange information. Use only
genuine Husky replacement parts.
Never substitute parts. Do not use
modified parts or parts which will not
give equivalent performance to the
original equipment. Tool performance,
safety and durability could be reduced.
When ordering replacement parts,
specify by part number.

This manual is related to the following products: