Huey Chiao HCB10 - Manual (Page 7)

5
● While the Headset is turned on, it will automatically search for
the paired device. Under “ON” mode and within the effective
range of 10 meters from the Headset, the indicator will flash the
blue light to indicate that it entered the connecting mode.
● When turning the headset off, you will hear one “Bi” sound fol-
lowed by two “Du” sounds, then the indicator will shut off after
flashing the red light for a few times.
6. Pairing the Headset (or any Bluetooth Device)
You must pair the Headset with your Bluetooth phone or any
Bluetooth device before you use the Headset for the first time.
1. Ensure the Headset is off.
2. Press and hold the function button for 5 seconds until the blue
indicator light flashes with the red indicator light to enter the
pairing mode.
3. Ensure your mobile phone has the Bluetooth function and
start the Bluetooth new device searching function. Please
follow the instructions of your mobile phone to proceed the
operation.
4. When your mobile phone is in the stage of searching a new
Bluetooth device, it will find HCB10.
5. Please choose and confirm HCB10.
6. Key in the Headset Password “0000” and press YES. If the
pairing is successful, the indicator turns to flash the blue light
only. For some mobile phones, after pairing you may have
to select and confirm HCB10 again to start the connection.