Hamilton Beach HIR800 - Manual (Page 5)

9
Vertical Steam
1. Follow Steps 1 through 4 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from garment and press and
release the Blast Button to steam out wrinkles. Do not
press Blast Button more than once every 2 seconds.
4. To turn iron off, turn Temperature Control to OFF ( O ).
Unplug iron.
5. Empty water from the iron following directions in “Caring for
Your Iron.”
NOTE: Do not allow hot soleplate to touch delicate garments.
Features
(continued)
Power On Light
This light comes on when the iron is
plugged in. A red light is displayed to
indicate that power is off. A green light is
displayed to indicate that a fabric has
been selected. The light will stay on until
iron is unplugged.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord beyond colored tape
indicator on cord.
2. To store cord, press and hold the
Cord Release Button while guiding
the cord into the storage area.
CAUTION: Hold plug while
retracting cord. Do not let cord
retract freely. Cord may jam on
reel or loose cord may whip back
and forth and could cause injury.
8
Power On
Light
Features
(continued)
840136500 ENv01.qxd 3/11/05 9:40 AM Page 8