Philips GC4850 - Manual (Page 12)

Features
spray function
You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is water in the water tank.
2 Press the spray button several times to moisten the article to be
ironed.
steam boost function
A steam boost from the special Steam Tip soleplate helps remove stubborn
creases. The steam boost enhances the distribution of steam into every
part of your garment.
The steam boost function can only be used at temperature settings
between 3 and MAX.
1 Press and release the steam boost button.
vertical steam boost
1 You can also use the steam boost function when you hold the iron in
vertical position.
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam at people.
Drip stop
This iron is equipped with a drip-stop function: the iron automatically stops
producing steam when the temperature is too low, to prevent water from
dripping out of the soleplate. When this happens, you may hear a sound.
automatic shut-off function (specific types only)
The automatic shut-off function automatically switches off the iron if it has
not been moved for a while.
, The red auto-off light flashes to indicate that the iron has been
switched off by the automatic shut-off function.
To let the iron heat up again:
1 Pick up the iron or move it slightly.
, The red auto-off light goes out.
EnGlish
12