Adjusting the picture and the sound, Multiple sound modes – haier 25T3A-T User Manual
Page 15
Multiple Sound Modes
· ½ ± ã µ Д Н ¼ П с º Н Й щ Т ф µ ч Х ы ¹ ¦ Д Ь £ ¨ ½ У Й П Т ³ £ ©
Volume store
NORMAL VOL
HIGH VOL
LOW VOL
MENU
CH+
CH-
VOL-
VOL+
FUNCTION 1
LANG. ENGLISH
CURTAIN III
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
VOL STORE OFF
FUNCTION 1
S.STD
Adjusting the Picture and the Sound
(coutinued)
How to select the sound mode
You can quickly select you most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.NORMAL
VOL,HIGH VOL and LOW VOL can be
selected in turn(their parameter may
be adjusted due to your need).
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the NORMALVOL,
HIGH VOL or LOW VOL).
1.Press MENU button, until
FUNCTION 1 appears on the
screen.
2.Press CH+/- button, move
the indicator( ) to the HIGH
VOL, then press VOL+/-
button to adjust the parameter
you expect. With the same
method, you can adjust the
parameter of the NORMAL
VOL or the LOW VOL.
Suppose the LOW VOL is A,
NORMAL VOL is B, HIGH
VOL is C, then that will be:
0 A B C 100
When adjusting the three modes,you should press them in
proper order as
HIGH VOL,NORMAL VOL, LOW VOL.
3.Press the S.STD button repeatedly to select the
different sound setting modes.
When the VOL STORE( as above chart) is set ON, the
sudden change of the volume can be avoided when you
change the channel( only the pre-50 channels volume).
LANG. ENGLISH
CURTAIN III
LOW VOL 00
NORMAL VOL 00
VOL STORE OFF
HIGH VOL 00
S.STD