Holland Membrane - Manual (Page 13)

13
Holland Nameplate Membrane Switch
Checklist Appendix B
The following items need to be communicated to Holland Nameplate before
an order can be processed.
___ Mechanical dimensions of the finished part
___ Tolerance specified (+/- .015")
Type of switch
___ Non Tactile
___ Tactile with stainless steel domes
___ Tactile with polyester domes
Tail details
___ Tail exit point
___ Tail length
Tail termination
___ Berg Clincher
___ AMP
___ Solder Tabs
___ Exposed silver for ZIF
___ Other _______________
Pinout
___ Determined by Holland Nameplate