Philips GC4250 - Manual (Page 10)

10
B Steam and boiling water will come out of the soleplate. Impurities and
flakes (if any) will be flushed out.
7 Release the calc-clean button as soon as all the water in the
tank has been used up.
Repeat the calc-clean process if the iron still contains a lot of impurities.
After the calc-clean process
- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.
Storage
1 Make sure the appliance is unplugged and set the steam control
to position 0.
2 Empty the water tank.
C
3 Put the iron on the heat-resistant protective cover.
Do not use the heat-resistant protective cover during ironing.
C
4 Wind the mains cord around the cord storage facility.
5 Store the iron with the heat-resistant protective cover
horizontally on a stable surface.
Environment
C
◗ Do not throw the appliance away with the normal household
waste at the end of its life, but hand it in at an official collection
point for recycling. By doing this you will help to preserve the
environment.
ENGLISH 10