Hitachi OPTIGEN AP 720STM User Manual
Page 16
15
(Examples of alarm messages, cont.)
o
Example) “Information =C2 L”
“C2 L” indicates failure from the head part of top/bottom carrier drive or sensor
failure. After you confirm the status, press “CONTINUE” key and check the
status.
o
Example) “Information =C2 H”
“C2 H” indicates failure from the head part of top/bottom carrier drive or
sensor failure. After you confirm the status, press “CONTINUE” key and check
the status.
o
Example) “Information =C3 L”
“C3 L” indicates failure of PET rack rotation carrier drive or sensor failure.
After you confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C3 H”
“C3 H” indicates failure of PET rack rotation carrier drive or sensor failure.
After you confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C4 L”
“C4 L” indicates failure of reagent rack rotation carrier drive or sensor failure.
After you confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C4 H”
“C4 H” indicates failure of reagent rack rotation carrier drive or sensor failure.
After you confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C5 L”
“C5 L” indicates failure of aspiration syringe drive or sensor failure. After you
confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C5 H”
“C5 H” indicates failure of aspiration syringe drive or sensor failure. After you
confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C6 L”
“C6 L” indicates failure of wash syringe drive or sensor failure. After you
confirm the status, press “CONTINUE” key and check the status.
o
Example) “Information =C6 H”
“C6 H” indicates failure of wash syringe drive or sensor failure. After you
confirm the status, press “CONTINUE” key and check the status.