Hamilton Beach 14975 - Manual (Page 3)

5
1. Water Fill Cover
2. Steam ON/OFF Control
3. Spray and Blast Buttons
4. Auto Shutoff Reset
Light* (GREEN) and
Power ON Light (RED)
5. Swivel Power Cord
6. Heel Rest
7. Temperature Control Dial
8. Soleplate
9. Self Clean
* on select models only
Parts and Features
Spray Steam
4
Steam ON/OFF
Control
This iron is equipped with a position/motion sensor. This means
that if the iron is left motionless it will turn off automatically and
cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on
heel position.
The iron will reheat to the previously selected setting.
Iron Position Motionless Time
Resting on soleplate 30 seconds
Resting on either side 30 seconds
Resting on heel 15 minutes
Sensor Control
Position Sensing
The iron will turn off automatically when left in the following
positions.
The auto off time varies based on the iron’s position.
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position,
the iron will automatically shut off and the green light will
blink. Move iron upright to vertical position to turn back on..
840153100 Ev01.qxd 5/18/06 2:36 PM Page 4