Homelite GS120V - Manual (Page 9)

Page 9
TO INSTALL BATTERY PACK
• Place the battery pack in the grass shear. Align
raised rib on battery pack with groove in grass
shear battery port.
See Figure 3.
• Make sure the latches on each side of the battery
pack snap in place and that battery pack is secured
in the grass shear before beginning operation.
OPERATION
CAUTION:
When placing battery pack in your grass shear,
be sure raised rib on battery pack aligns with
groove in grass shear battery port and latches
snap in place properly. Improper assembly of
battery pack can cause damage to internal
components.
STARTING THE GRASS SHEAR
• Remove the blade cover.
• Press and hold the trigger lock button. See
Figure 4. This makes the trigger operational.
• Release the trigger lock button and continue to
squeeze the trigger for extended operation.
Fig. 4
TRIGGER LOCK
BUTTON
TRIGGER
STOPPING THE GRASS SHEAR
• Release the trigger to stop the grass shear.
• Upon release of the trigger, the trigger lock button
will be automatically reset to the lock position.
LATCHES
BATTERY PACK
BATTERY
PORT
Fig. 3
TO REMOVE BATTERY PACK
• Locate latches on side of battery pack and de-
press both sides to release the battery pack from
the grass shear.
See Figure 3.
• Remove battery pack from the grass shear.