Operation – Husqvarna SG13A User Manual
Page 28
28
OPERATION
Using your stump grinder
WARNING!
NEVER allow the blade to touch the
ground until it has stopped turning.
1.
Place the cutting blade near the top front edge
of the tree stump.
2.
Set the brake to lock position.
3.
Set the throttle to SLOW (START)
DISENGAGE.
4.
Set engine switch on handlebar to ON.
8011-201-chg
.
This manual is related to the following products:
See also other documents in the category Husqvarna Tools:
- 953900764 (13 pages)
- 325E-X (24 pages)
- 968999107 / W3213A (35 pages)
- SC18/968999352 (14 pages)
- GR50 (40 pages)
- 1152417-30 (16 pages)
- 327LDX (36 pages)
- Cabrio 262 (12 pages)
- SPM1702SM (36 pages)
- 324RX (40 pages)
- 143R (36 pages)
- PG680 (28 pages)
- PS 50 (43 pages)
- Edger Attachment (28 pages)
- Cabrio Plus 257 L (12 pages)
- 225AI15/AI25 (20 pages)
- 953900748 (12 pages)
- 143R-II (36 pages)
- 323P4 (32 pages)
- 323P4 (32 pages)
- 323P4 (32 pages)
- 326SX-Series (24 pages)
- 535RXT (44 pages)
- 327LDX-series (36 pages)
- Stump Grinder SG13A (52 pages)
- K3000 (24 pages)
- LE389 (13 pages)
- Elite 2.510 (13 pages)
- 325RDX-Series (36 pages)
- 325RDX-Series (44 pages)
- 327P5X (36 pages)
- 128R (27 pages)
- 335LX-SERIES 335LS (36 pages)
- SG13A / CE (50 pages)
- BCZ3205DW (18 pages)
- Clearing Saw 53 5RJ (36 pages)
- FS 800 E (15 pages)
- K950 (24 pages)
- CT16 (15 pages)
- 125R (28 pages)
- Operator's Manual 333RJ (36 pages)
- BP4E (9 pages)
- DXR-310 (60 pages)
- LE475 (16 pages)
- 235F (44 pages)