haier HL19R1 - Manual (Page 25)

Menu Operations
Function Menu Options
1. Press MENU button and until the following menu appears on the
screen.
2. Press / button to enter the Function menu and to go up and
down to select the desired option .
3.Press / button to confirm and increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press button to select language of the OSD.
OSD Timeout: Press to select Middle, Short and Long to change the
time of the OSD display.
OSD Transparency: Press to select among Low, High and Middle
to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press to select among Full Screen, Normal, Wide,
Zoom and Cinema to change the display mode. ( display mode may differ from
different inputs)
Blue Screen: Press to select On , the screen will be in blue after
3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.
Time Setup: Press / to enter the submenu.
Time Zone: Press to select the appropriate time zone.
/
/ ENTER
ENTER
ENTER
/
/
/
/
/
/
/
Function
Language English
OSD Timeout Short
OSD Transparency Middle
Screen Mode Full screen
Blue Screen On
DPMS On
Time Setup
Closed Caption
Default
Select Back EXIT
CH+/-
VOL+/-
Video
Audio
Channel
Lock
Function