haier HWM75-0528 A - Manual (Page 9)

Connection between the water inlet hose and the washer
1. Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water
inlet hose
jointer of the
water inlet valve water absorption
cushion.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
Locking level
Slider
START/PAUSE button
After the power is switched on,press it to
start the machine
During working,push it to pause.
During pause,push this button to restart and
go on working
a
5 Use the operation buttons
Description of operation button
Indicator mode and meaning
START
PAUSE
TIME REMAINED
RESERVE
Attention:
1. T he digitron displays the remained time and process alternately during the washing machine
working.
2. The process function is not selected solely .(see to Page 12)
SOAK HEAVY
SAVE
SINGLE WASH
SINGLE SPIN
TUB CLEAN
GENTLE
COTTON
RINSE SPIN
AIR DRY
SOAK
WASH
SPIN
RINSE
Program
INDICATION OF PROCESS
(NO CHOOSING)
STANDARD
Connection between the jointer of the water inlet hose and the water inlet hose
1. Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard. Locking level
the jointer of the
water inlet hose
Slider
1. Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Check the connection between the jointer of the water inlet hose
and the water faucet
Flashing: indicate the running program
On: indicate the program about to run, or
indicate the selected mode
Off: