beautypg.com

Adjust the feet, Move the machine into position – Hotpoint WMA76 User Manual

Page 10

background image

7.Adjust the feet...

Once the machine is in place

10

6. Move the machine into position...

Your machine is heavy so care must be taken when moving
it. To help you we have fitted wheels to the bottom rear of
the machine.

When moving the machine, take care not to kink or
damage the hoses at the back of machine.

Please take care not to damage any floor coverings
when moving the machine.

WARNING:

Do not drag

or lift the
machine by
it’s door.

INST

ALLING

YOUR MA

CHINE

Your machine may become noisy or move
about if it is not level.
If necessary, to level the machine adjust
the two front feet, as follows:

When your machine is in its intended
location, make sure that it is level by
turning one or both of the front feet
clockwise until the machine stands
firm and level.

The spring on each foot will stop them
coming loose.

Switch the machine on at the plug
socket.

Now that you have successfully installed your new machine, we advise
that you run it through a 95˚ White Cotton programme without any
laundry and without any detergent in it.
This will check your installation, connections and drainage, and will
thoroughly clean the interior before you carry out an actual wash
programme on your laundry.
NOTE: This will take approximately 2 hours to complete.

Continue reading this book to get to know the various features of the
machine.

This manual is related to the following products: