beautypg.com

Personalisations, Setting the temperature (variable temperature ), Set the drying cycle (drying programme) – Hotpoint BWD 129 User Manual

Page 13: Functions

background image

11

GB

Personalisations

Setting the temperature (Variable Temperature )

Turn the VARIABLE TEMPERATURE knob to set the wash temperature (see Programme table on page 10).

The temperature can be lowered, or even set to a cold wash (Cold).

Set the drying cycle (Drying Programme)

Turn the DRYING PROGRAMME knob to set the desired

drying type. Two options are available:

A - Based on time: From 40 minutes to 150.
B - Based on the damp level of the dry clothes:

Iron Dry: slightly damp clothes, easy to iron.

Hanger Dry : dry clothes to put away.

Extra dry: very dry clothes, recommended for

towelling and bathrobes.
A cooling stage is foreseen at the end of the drying cycle.

If your laundry load to wash and dry is exceptionally in

excess of the maximum load foreseen (see table opposite), perform the wash cycle, and when the programme is

complete, divide up the garments and put part of them back in the drum. Now follow the instructions provided

for a dry only cycle. Repeat this procedure for the remainder of the load.

Dry only

Turn the PROGRAMME knob to one of the drying settings

depending on the type of fabric, then select

the desired drying type using the DRYING PROGRAMME knob.

Important: - A spin cycle is carried out during the drying if you have set a cotton programme and a level of

dryness (Extra dry, Hanger Dry, Iron Dry).

- The woollen garments drying cycle should only and exclusively be run together with the selection of a

specific cycle time (150 - 100 - 60 - 40 minutes). We recommend a 60 minute drying cycle for a 1 kg load.

If one of the three levels (Extra dry, Hanger Dry, Iron Dry) is selected by mistake, the appliance will run a

drying cycle lasting the MAX time foreseen (150 minutes).

- For cotton loads of less than 1 Kg, use the drying programme designed for synthetic fabrics.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

Service

Troubleshooting

Precautions

Care

Programmes

Detergents

Installation

Description

Fabric

type

Load type

Max.

load

(kg)

Extra

dry

Hanger

Dry

Iron

Dry

Cotton,

Linen

Clothing of different

sizes

4

130

120

110

Cotton

Terry towels

4

130

120

110

Terital,

Cotton

Sheets, Shirts

2,5

90

80

70

Acrylics

Pyjamas, socks, etc.

1

6

5

6

0

6

0

Nylon

Slips, tights, stockings, etc.

1

6

5

6

0

6

0

Table of drying times

The data contained in the

table are purely indicative.

Function

Effect

Comments

Enabled with

programmes:

Delay

Start

Delays the start

of the wash by

up to 9 hours.

Press the button repeatedly until the LED corresponding to the

desired delay is turned on.

The fifth time the button is pressed, the function will be disabled.

N.B.: Once you have pressed the Start/Reset button, the delay

can only be decreased if you wish to modify it.

All

Super

Wash

Allows for an

impeccable wash,

visibly whiter

than a standard

Class A wash.

This function is incompatible with the QUICK WASH function.

A, B, C, D,

E, F, G

Quick

Wash

Cuts the duration

of the wash cycle

by 30%.

This function is incompatible with the SUPER WASH function.

A, B, C, D,

E, F, G

1200

600

Reduces the spin

speed.

All

programmes

except for L

and draining.