Philips FC8256 - Manual (Page 9)

12 Put the dust container back into the appliance (Fig. 23).
13 Close the cover (‘click’) (Fig. 24).
storage (Fig. 25)
1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the cord.
3 You can store the appliance in two ways:
- Insert the ridge on the nozzle into the parking slot to park the tube and then put the appliance
away (Fig. 10).
- Store the appliance and its accessories in the storage box supplied.
4 To store the appliance, look at the storage figure at the beginning of this user manual. This
figure shows you how to store the appliance and its accessories in the box or plastic storage
container.
replacement
replacing filters
Always unplug the appliance before you replace a filter.
Your vacuum cleaner is equipped with either a micro filter or a HEPA Filter.
Micro filter (specific types only)
Replace the micro filter every 6 months.
1 To remove the filter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 26).
2 Remove the filter holder from the grille.
3 Remove the old filter from the filter grille.
4 Put the new filter on the grille and lock it into place with the filter support (Fig. 27).
5 Put the filter grille back into the appliance (1) and turn it clockwise (2) (Fig. 28).
hEPa filter (specific types only)
Replace the HEPA filter every 6 months.
1 To remove the filter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 26).
2 Remove the HEPA filter (Fig. 29).
3 Insert a new HEPA filter.
4 Put the filter grille back into the appliance (1) and turn it clockwise (2) (Fig. 28).
accessories
If you have any difficulties obtaining filters or other accessories for this appliance, please contact the
Philips Consumer Care Centre in your country or consult the worldwide guarantee leaflet.
ordering filters
- HEPA filters are available under type number FC8029.
- Micro filters are available under service number 4322 000 38900.
- Filter cylinders are available under type number FC8028.
English 9