X-1 (H2O Audio) iDive 300 for iPod - Manual (Page 6)

To Close Case
1. Close lid
2. Rotate the cam knob clockwise 180°
3. Close the cam knob lock
IV. Install batteries
1. Open case.
2. Disconnect and remove iPod from case if installed.
3. Turn the battery cover screw counter-clockwise until the screw loses contact with the insert plate.
4. Remove battery cover.
5. Install 3 AA batteries in the battery compartment. Make sure the positive and negative ends of the
battery are oriented per the inscribed markings in the case.
6. Reinstall and close battery cover.
V. Install iPod specifi c inserts and height adjusters
The inserts and height adjusters are used to securely hold your iPod in the correct location inside the case.
Consult the following chart to determine which inserts and height adjusters should be used with your iPod
model.
Please note some iPod models will not require height adjusters.
iPod Model Upper Insert Letter Lower Insert Letter
Height Adjuster
Number
iPod touch A B 1
iPhone* A A N/A
iPhone 3G* A A N/A
iPod 5 th Gen (30Gb) B B 2
iPod 5 th Gen (60/80Gb) B B N/A
iPod classic (80Gb) B B 4
iPod classic (160Gb) B B 3
iPod nano 1 st Gen C C N/A
iPod nano 2 nd Gen C C N/A
iPod nano 3 rd gen D D N/A
* The iDive300 is not certifi ed to work with the iPhone or iPhone 3G and will cause
interference with phone capabilities.
7 8