Philips FC6055 - Manual (Page 13)

Problem Cause Solution
The nozzle is
clogged.
Remove the obstruction from
the nozzle.
Dust
escapes
from the
appliance.
The filter holder has
not been placed
properly in the dust
compartment.
Reinsert the filter holder (see
chapter ‘Cleaning’).
The filter holder has
not been placed in
the dust
compartment at all.
Place the filter holder in the dust
compartment (see chapter
‘Cleaning’)rtment.
The filter is not in
the correct position.
Fasten the filter in the filter
holder by turning it clockwise
and put the filter holder into the
dust compartment.
The dust
compartment is full.
Empty the dust compartment
(see chapter ‘Cleaning’).
The
appliance
does not
suck up
liquid.
The dust
compartment is full.
Empty the dust compartment
(see chapter ‘Cleaning’).
Liquid leaks
from the
appliance.
The filter is wet. The filter must be dry before
you place it back into the
appliance.
The filter has not
been installed.
Install the filter before switching
the appliance on to suck up
liquid.
The filter holder is
not in the correct
position.
Place the filter holder in the
correct position.
English 1