beautypg.com

Hitachi ELITEBOOK 2730P User Manual

Page 58

background image

Removal and replacement procedures

Maintenance and Service Guide

4–19

2. Turn the computer display-side up, with the front toward you.

3. Open the computer as far as possible.

4. Lift the rear edge of the keyboard 1 and slide it 2 back until the pointing stick cable is accessible.

5. Release the zero insertion force (ZIF) connector 3 to which the pointing stick cable is attached, and disconnect

the pointing stick cable 4 from the system board.

6. Swing the top edge of the keyboard 1 up and forward until it rests upside down on the palm rest.

7. Release the ZIF connector 2 to which the keyboard cable is attached, and disconnect the keyboard cable 3

from the system board.

8. Remove the keyboard.

Reverse this procedure to install the keyboard.