haier HNSE045 User Manual

Page 9

English

1. Remove the top hinge cover.

2. Loosen the top hinge screws using a phillips head screwdriver.

3. Adjust the door or put a spacer in between and then tighten the

screws.

4. Replace the top hinge cover.

Door Alignment

NOTE: As the door gets pressed in during shipping, after reversing

the door, the gasket may have to be reset. This is done to

prevent the cool refrigerated air from escaping. If there is a

gap between the door gasket and the cabinet, set the gasket by

gently pulling it out to seal the gap.