Humax IR-PLUS User Manual
Page 13
**
This chapter describes how to set up the product. Select the most appropriate procedure depending on your case. Before you connect
the product to any other equipment, you must disconnect all the equipment from their power sources.
Note: If you encounter any problem when setting up the product, please contact your local product distributor.
2.1 Connecting Antenna/TV
**
**
1. Connect an Antenna to LNB IN on the product.
2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable.
3. Connect AUDIO L/R on the product to AUDIO IN L/R on the TV using the RCA cable.
GB 12