Hitachi CR 18DL - Manual (Page 10)

10
English
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO
OTHER USERS
AND
OWNERS OF THIS TOOL!
CAUTION ON LITHIUM-ION BATTERY
To extend the lifetime, the lithium-ion battery equips with the protection function to stop
the output.
In the cases of 1 and 2 described below, when using this product, even if you are pulling the
switch, the motor may stop. This is not the trouble but the result of protection function.
1.
When the battery power remaining runs out (the battery voltage drops to about 12V),
the motor stops.
In such case, charge it up immediately.
2. If the tool is overloaded, the motor may stop. In this case, release the switch of tool and
eliminate causes of overloading. After that, you can use it again.