Hilti WSC 70-A36 - Manual (Page 9)

2.9 Additional items required for operating the tool
For the WSC 70 ತA36: a B36/2.4 NiCd battery and a C7/36ತACS charger or a B36/3.3 Li-ion battery and a
C4/36Li ತACS charger.
For the WSC 55 ತA24: a B24/2.0 NiCd battery and a C7/24 or C7/36ತACS charger.
NOTE
Depending on the version, these items may be supplied with the power tool.
3. Accessories
Accessories for the WSC 70 ತA36
Charger C7/36-ACS
Charger C4/36-ACS
Battery B36/2.4 NiCd
Battery B36/3.3 Li-ion
Parallel guide (rip fence) WPG 70/55
Guide rail WGS 1400 ತ2B
Accessories for the WSC 55 ತA24
Charger C7/24
Charger C7/36-ACS
Battery B24/2.0 NiCd
Parallel guide (rip fence) WPG 70/55
Guide rail WGS 1400 ತ2B
4. Technical data
Power tool WSC 70 ತA36 WSC 55 ತA24
Rated voltage (DC voltage) 36 V 24 V
Weight in accordance with EPTA
procedure 01/2003 0 kg 0 kg
Dimensions (L x W x H) 307 mm x 393 mm x 233 mm 296 mm x 381 mm x 233 mm
Base plate 193 mm x 320 mm 193 mm x 320 mm
Maximum saw blade diameter 190 mm 160 mm
Minimum saw blade diameter 176 mm 149 mm
Saw blade disc thickness 0.5 to 1.5 mm 0.5 to 1.5 mm
Kerf width 1.6 to 2 mm 1.5 to 2 mm
Saw blade arbor size 30 mm 20 mm
Cutting depth Cutting angle 90°: 70 mm
Cutting angle 50°: 45 mm
Cutting angle 45°: 51 mm Cutting angle 90°: 55 mm
Cutting angle 50°: 36 mm
Cutting angle 45°: 40 mm
Riving knife thickness 1.5 mm 1.4 mm
Speed under no load 3,900 r.p.m. 3,300 r.p.m.
en
20