Humminbird 585C User Manual

Page 22

Depth Offset

(Advanced)

Depth Offset will adjust the digital depth readout to indicate depth from the waterline
or boat's keel. Enter a positive vertical measurement from the transducer to the
waterline to read the depth from the waterline. Enter a negative vertical measurement
from the transducer to keel to read the depth from the keel. This menu choice is
available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Depth Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Depth Offset on the

Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Depth Offset

setting. (-10.0 to +10.0 or -3 to 3 meters [International Models Only], Default = 0)

Temp Offset

(Advanced)

Temp Offset will adjust the temperature readout by the amount entered. This menu
choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Temp Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Temp Offset on the

Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Offset

setting. (-10.0 to +10.0 , Default = 0)

Speed Calibration

(Advanced, with Temp/Speed Only)

Speed Calibration will adjust the speed readout by the percentage entered, and will only
appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved
at least once when the unit is in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Speed Calibration setting:

1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on

the Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Speed Calibration

setting. (-20% to +20%, Default = 0%)

Select Readouts

(Advanced, Sonar View Only)

Select Readouts sets individual digital readouts on the Sonar
View. This Advanced feature allows you to select what data
will be displayed in each of 5 fixed-position data windows
arranged around the left and bottom edges of the Sonar View
screen, or whether a particular window will be turned off,
displaying nothing in that area; you can access this menu
choice only when in Advanced User Mode (see Setup Menu
Tab: User Mode.)

Data windows can display readouts from supported
accessories such as Temp/Speed. Each data window can
either be empty or contain one of the following:

- Speed (will only be displayed if a Temp/Speed Accessory is

attached and the paddlewheel has moved at least once)

- Temperature

- Triplog (will only be displayed if a Temp/Speed Accessory

is attached and the paddlewheel has moved at least once)

- Voltage.

To Select Readouts:

1. Make sure you are in Advanced User Mode, then

highlight Select Readouts on the Setup main menu.

2. Use the RIGHT 4-Way Cursor Control key to initiate this

procedure.

3. The Select Readouts submenu will appear, showing a list

of all Readouts. Use the UP or DOWN Cursor keys to
select a particular Readout position, then use the RIGHT
or LEFT Cursor keys to change what will be displayed at
that position. (Off, Speed, Temperature, Triplog,
Voltage)

Default Sonar View

Customized Sonar View

Select Readouts

FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 42