Hamilton Beach 840111900 User Manual

Page 4

Automatic Shutoff Light and
Reset Button
If the iron is an Automatic Shutoff
model, the light comes on when the
iron is first plugged in. After 1 hour
the iron will shutoff and the light will
go out. Push the Reset Button to
turn the iron back on for another
hour of ironing.

Vertical Steam
1. Unplug iron. Flip open water tank

cover. Using a cup, slowly pour
8 ounces of tap water into water
tank opening.

2. Plug iron into outlet.
3. Turn the Temperature Control Dial

to highest setting.

4. Allow three minutes for the iron to

reach desired temperature.

5. Hang garment in a location that is not susceptible to

damage from heat or moisture. Do not hang in front of
wallpaper, window, or mirror.

6. Hold iron about 6 inches away from garment and press

and release the Blast Button to steam out wrinkles. Do not
press the Blast Button more than once every 2 seconds.

7. To turn iron off, turn Temperature Control Dial to Off.

Unplug iron.

8. Empty water from the iron following directions in “Caring

for Your Iron.”

NOTE: Do not allow hot soleplate to touch delicate garments.

Features

(on selected models)

Fabric Setting Chart

To Iron

Off

Nylon

Acrylic

Silk

Polyester

Wool

Rayon

Cotton

Linen

Ironing Instructions

Steam

Setting

Dry iron on the wrong side of the fabric.

Iron with fabric still damp.

Steam iron on the wrong side of fabric.

Iron on the wrong side of fabric.

Iron while still damp using steam
and/or spray.

Iron on wrong side of fabric while still
damp.

Power Light

Models that do not have the auto-
matic shutoff and the reset button,
do have a power light. This light
comes on when the iron is plugged
in. The light will remain on even if
the Temperature Control Dial is
turned to off. The light will stay on
until iron is unplugged.