Husqvarna TA36 - Manual (Page 15)

15
ENGINE SERVICE AND MAINTENANCE
Follow the engine manufacturers maintenance instructions. Should any malfunction occur with the
engine during the warranty period, take it to an Authorized Service Dealer. DO NOT tear down the
engine, as this may void the Engine Manufacturers Warranty NOTE: Refer to engine manufacturers
owners manual for all engine service information.
PREVENTATIVE MAINTENANCE SCHEDULE
A) Inspection Schedule
Item Out of Box First 5 hrs. Every 10 hrs Each Use
• Engine Oil •
• Gear box oil •
• Engine air cleaner •
• Clutch & cable • •
• Chain tension • • •
• Belt wear & tension • •
• Tine wear & condition • •
• Fasteners • •
• Sprockets & set screws • •
• Frame condition • •
• Decals • •
B) Lubrication Schedule
Item Lubricant Every 20 hrs Every 60 hrs As Required Storage
• Engine Oil, see engine •
Owner’s manual
• GearBox Oil, see engine •
Owner’s manual
• Rear wheels Lithium based grease • • •
• Chain Graphite dry lubricant • •
(Aerosol)
• Tines Light machine oil •
• Linkage 30W oil •(*) •
(*) after each pressure wash or steam cleaning
TINE WEAR
After your Husqvarna Aerator has been
used for sometime, the tines will wear.
When this happens their aerating
performance will diminish. Inspect tines
using the drawing, replace when at
minimum length or before. (Tines are 5”
when new.)
Maintenance and Service Instructions