beautypg.com

Accessories, Refrigerator compartment, Freezer compartment – Hotpoint FF48TX User Manual

Page 6

background image

6

GB

Refrigerator compartment

SHELVES: the shelves are

removable and their height may be

adjusted thanks to special rails

(see diagram), allowing easy

storage of large containers and

bulky food. The height may be

adjusted without removing the

shelf completely.

EVER FRESH: shelf dedicated to

storing food in vacuum-packed

containers. Food keeps for longer

when stored in the containers

provided.

CAN RACK shelf: stores cans

horizontally (see diagram). Yoghurt,

butter or general containers may

also be stored here.

ODOUR FILTER: some models

are fitted with a new active carbon

odour filter, which ensures better

air quality inside the refrigerator.

The filter is located on the bottom

right-hand side, inside the

ventilation opening.

Freezer compartment

ICE PARTY: ensures bottles of

sparkling wine or champagne reach

the right temperature. Place the

bottle in the bucket provided inside

the FREEZER and STORAGE

compartment. The bucket may be

used to serve the bottle and keeps it

cool outside the appliance.

ICE CARE tray

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer

comes into contact with the food placed inside the freezer

compartment; furthermore, the dripping of the water during

filling is avoided (a lid to cover up the hole after filling with

water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to melt

and empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (see diagram).

4. Close the opening with the lid provided and put the tray

back, placing the top part in the corresponding housing

and allowing it to drop in again.

5. When the ice has formed (minimum time approximately

8 hours) knock the tray against a hard surface and wet

the outside so that the ice cubes come loose and take

them out through the opening.

Accessories

1

2

WATER LEVEL

MAX

W

A

TER LEVEL

MAX

W

A

TER LEVEL

MAX

This manual is related to the following products: