Harbor Freight Tools CHICAGO 46507 - Manual (Page 2)

SPECIFICATIONS TABLE
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance, and cleaning procedures, parts list and
assembly diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep this manual and invoice in a safe
and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5. USE EYE, BREATHING, AND HEARING PROTECTION. Wear ANSI approved
safety impact eye glasses, ANSI approved breathing protection, and ANSI
approved hearing protection when using this product. ANSI approved safety
impact eye glasses, dust masks, and hearing protectors are available from
Harbor Freight Tools.
SKU 46507 PAGE 2
Item Description
Electrical
Requirements 120V / 60 Hz / 11 Load Amp
Double Insulated Motor
1,000 - 3,000 RPM Variable Speed
16 Gauge Power Cord
Spindle Thread 5/8”-11 Threads Per Inch
Handle Mounting Threaded, 3 Positions
Wool Cover Size 8”
Tool Length 17”
Tool Weight 8.40 Lbs. With Wool Cover
96GA
E210256
Rev 12/01