Hunter Fan HEPATECH 30701 - Manual (Page 5)

5 ©2009 Hunter Fan Co. 43066-01 20091221
Filter Change Calendar: The filter calendar is
designed to optimize the performance of the
air purifer by reminding you when to check the
HEPAtech
® and Pre-filters. It is located around
the speed control dial.
Pre-filter Calendar: The outer knob of the
filter change calendar is the pre-filter counter.
To use, align the pre-filter symbol ( ) on
the ring with the month that you installed the
fILTer rePLACemenT
oPerATIng Your AIr PurIfIer
HEPAtech ® Filter Calendar: The HEPAtech ®
Filter indicator is located in the center of
the calendar ring. To set the HEPAtech
Filter counter, rotate the calendar ring to
align the filter symbol ( ) with the month
that you checked/replaced the filter. Since
the filter is designed for 6 months of use,
the second indicator ( ) will serve as a
reminder to check the filter every 6 months.
If the HEPAtech
® filter ( ) is checked in
February, then the filter would need to be
checked again ( ) in August. Figure 9.
pre-filter. The inspection symbol ( ) on
the outer knob points to the month in which
you should check the pre-filter for wear. The
pre-filter is designed for 3 months of usage.
Replacing or checking the pre-filter (
) in May means the filter would need to be
checked again ( ) in August. Figure 8.
6 Months
3 Months
figure 8.
figure 9.
NOTE: DO NOT run the ionizer if tobacco
smoke, air fresheners, dripless wax candles,
or grease from cooking is present.
On/Speed Control: Rotate the Speed
Control knob to set the desired speed.
Unit off
Low speed - Recommended for
use when soft background noise
is unwanted.
Medium speed - Typical usage setting.
Soft background noise is not an issue.
High speed - Use when quick, efficient
results to a room’s air quality are
desired.
The fan speed can be adjusted at any time.
While the unit is running, the light ring will
glow to indicate the unit is on.
Press the Ionizer button to turn on the Ionizer
function of your air purifier.
figure 7.
Pre-Filter
Calendar
Filter
Calendar
Ionizer
Button
On/Off
Speed
Control